THYOSIL MFP350
Flow modifier 流动改性剂

Description描述

THYOSIL MFP350 is an acrylic resin specially developed to improve flow and impact resistance in clear PC (Polycarbonate) and blends, allowing resins to flow without migration. For its properties is commonly used to reduce injection molding fill pressures and fill times. THYOSIL MFP350 allows high performance plastics to be formulated with higher loadings of inerts, such as fire retardants, colorants or mineral fillers.

THYOSIL

MFP350是一种专为改进透明PC（聚碳酸酯）和共混物中的流动性和抗冲击性而开发的丙烯酸树脂，允许树脂流动而不迁移。 由于其特性通常用于减少注塑成型的填充压力和填充时间。THYOSIL MFP350允许高性能塑料配制成更高负载的惰性物质，如阻燃剂，着色剂或矿物填料

Advantages 优势

ü       Maintains transparency.保持透明度。

ü       Good heat resistance.良好的耐热性。

ü       Does not need to use solvents.不需要使用溶剂

ü       Keeps flow at lower process temperature.在低加工温度保持良好的流动性

ü       Reduce internal stress.减轻内部应力。

ü       High retention of mechanical properties. 机械性能维持不变。

Typical Properties典型值

These properties are typical, do not constitute specifications

Dosage用量

THYOSIL MFP350 is used at 1-5% in polycarbonate. 1-5%用于 PC

Dossing 3% THYOSIL MFP350 increased flow will be 20 to 25%.

 1-5%用于 PC ， 3% 可以提高20-25的流动性

Safe handling Information

Before using this product, read carefully the Material Safety Data Sheet (MSDS).

Note: The statements above are based on the current state of knowledge. They are intended to describe the product in relation to necessary safety precautions, and should not be used as a warranty of any specific property. Revision: March 2017.